ECONOMY
Costs halved in maintenance
BE BED implements a series of patented technologies that allow significant reductions in maintenance costs and that allow it to become the most advantageous annual cost bed considering a period of at least 10 years of life. The costs of maintenance in the optimal conditions of BE BED, are much lower than any other type of sunbed, to compensate for any differences of first purchase. There are also other technologies that allow space savings in storage warehouses, and economic recoveries in case of rental.
WHY DO YOU SAVE MONEY?
On the common beach lounger, the replacement of the Pianale Fabric can be performed only by means of special machines designed for the assembly of the Pianale Canvas and therefore the sunbeds must be sent to the supplier organized for such activities. On the BE BED beach sunbed, the FAST System consists of a special configuration of the Pianale frame that by opening allows the tension of the fabric to be loosened for its disassembly, while by closing it allows the tensioning of the fabric after it has been reassembled. Such intervention does not require special machines and can therefore be carried out directly by the owner and on his premises.
WHAT IS THE SAVING?
Interventions can be carried out by in-house personnel, thus avoiding costly external interventions, and can be performed on site, thus saving the costly relocation to the supplier's maintenance shops, especially in all those geographical areas where, since there is no service provider, it would be unthinkable to purchase such products since no one could maintain them except from a great distance and at considerable cost.
WHY DO YOU SAVE MONEY?
Installation of the Sunshade Fabric is done without renewing any components, there are no special difficulties, no risk of damage to the working parts.
WHAT IS THE SAVING?
There is no need to replace the plastic rivets in use on common Italian style sunbeds, no risk of damaging the Sunshade Frame, which on common sunbeds has to be beaten with a hammer, the intervention on the BE BED sunbed is very fast and easy.
WHY DO YOU SAVE MONEY?
While on the common Italian Style sunbed any maintenance work on the frame (replacement of any worn or damaged part), can be done exclusively by the supplier as each component is assembled with rivets that have to be destroyed and replaced with special presses, on the BE BED sunbed, being assembled with a special repositionable hardware, any maintenance work on the frame can be easily done with a common tool.
WHAT IS THE SAVING?
While on the common Italian Style sunbed any maintenance work on the frame (replacement of any worn or damaged part), can be done exclusively by the supplier as each component is assembled with rivets that have to be destroyed and replaced with special presses, on the BE BED sunbed, being assembled with a special repositionable hardware, any maintenance work on the frame can be easily done with a common tool.
TITLE?
On the common Italian style crib, the frame is completely assembled with rivets, which in case of intervention to the frame, must be destroyed and replaced. Moreover, their optimal tightening should be done only with the manufacturer's presses to achieve an uncompromising result.
WHY DO YOU SAVE MONEY?
Savings are enabled by Twin Life technology applied to the fabrics , and Fast technology applied to the frame. With this combination, fabrics can be "rotated" underneath to carry out reuse.
WHAT IS THE SAVING?
The savings are in the recycling of the fabric, which therefore does not have to be repurchased, and in the possibility of doing this work independently thanks to FAST technology. On the classic Italian-style beach lounger, when the fabric is faded on the top side, it is directly thrown away as the underside has rough finishes that cannot be turned on the top side.
WHY DO YOU SAVE MONEY?
Savings are made in that smaller deposits suffice, and also because more units can be transported at the same time.
WHAT IS THE SAVING?
Smaller storage spaces are needed, so it saves in footprint.
On the common Italian style sunbed, the frame is completely assembled with rivets, which in case of intervention to the frame, must be destroyed and replaced. Moreover, their optimal tightening should be done only with the manufacturer's presses to achieve an uncompromising result.
Note that the leg closure system is fully concealed unlike other models that retain the bulk in thickness of the appendages needed to support the legs when open.
WHY DO YOU SAVE MONEY?
There are many instances where savings can be achieved by using AntiFurbo. For example, in cases where cribs are prepared ready for use in large companies where the confusion or distraction of the Operators, encourages the dexterity of non-paying squatters; or there are the cases where the crib is included in the admission but in that case over-occupancy is produced which results in the need to reinforce the crib allocations available; also, in companies where the crib is delivered individually to the eligible, it still results in fewer staff as the work can be prepared in advance without stress and without the need to carry out the timely check.
WHAT IS THE SAVING?
With AntiFurbo, abusive use is combated, which takes cribs away from rental; therefore, savings are derived from not losing them. It also zeroes in on the possibility of "abusive renting" by mistrustful Co-workers who do not have the token themselves since it is only distributed at the Cashier's or Reception desk, and cannot hand over the lounger, cashing it in without the Management's knowledge.
HOW TO UNLOCK THE SUNBED
On the common Italian style sunbed, the frame is completely assembled with rivets, which in case of intervention to the frame, must be destroyed and replaced. Moreover, their optimal tightening should be done only with the manufacturer's presses to achieve an uncompromising result.
HOW TO LOCK THE SUNBED
Note that the leg closure system is fully concealed unlike other models that retain the bulk in thickness of the appendages needed to support the legs when open.
