CONFORT
Superior Confort
In terms of comfort, BE BED beats any comparison with any sun longuer "Italian Style" and also with most other alternative types, thanks to the following features:
INCREASED DIMENSIONS
The seat (part covered by the fabric) of the BE BED lounger is in "King Size" format i.e. about 67 cm, so a good 10 cm more than the common Italian style beach lounger which measures just 57 cm.
OPTIMIZED DIMENSIONS
Despite the increase in seat width, thanks to the volume optimization work of the entire product, the BE BED lounger remains as small in size and weight as possible, so as not to disrupt Operators' activities and work spaces. The end result allows BE BED to be contained to a weight increase of a few hundred grams and a width increase of no more than 15 mm compared to most common Italian Style beach loungers. For an effect … FULL VOLUME.
SOFT-END
It is the new proprietary and patented technology, which consists of a shaped padding that is inserted above the aluminum crossbeam of the Flatbed, but underneath the Flatbed Fabric, so it is not protruding and not visible. Since it is made from a closed-cell foam, it does not absorb water and can remain outside for long periods.
CUDDLES AT YOUR FEET
Soft-End is the solution to the big problem of the foot resting on the rigid aluminum crossbeam of the common Italian Style type sunbed. BE BED is the only Italian Style sunbed that solves this major problem. The end result provides comfort to the foot, absolute design neutrality, water neutrality and long life.
TAVOLETTA: MINIMAL HEADREST
Tavoletta is the Entry Level headrest, that is, the one with the lowest image, smallest footprint and lowest cost. However, it retains the same quality of construction as every Fulcor headrest, thus made with PVC fabrics and integrally welded in High Frequency to ensure watertightness and total waterproofing. Despite its size, it offers appreciable comfort and its lack is noticeable. In most cases it is made in a color matched to that of the Sunshade and usually different to that of the Flatbed. Not to be underestimated.
Measure: cm 39x18 thickness cm 4
ONDA: INTERMEDIATE SIZES
Onda is the Intermediate headrest by size. Its anatomical geometry promotes the relaxation of the skin of the neck and its even tanning. It is made from PVC fabrics and integrally welded in High Frequency to ensure watertightness and total impermeability. In most cases it is made in a color matched to that of the Sunshade and usually different to that of the Flatbed.
Measure: cm 40x30 thickness cm 6
ONDA-XL: THE EXCELLENT CHOICE
Onda-XL is the Important headrest in size and image and is the preferred one in BE BED installations. Its anatomical geometry allows the skin of the neck to be relaxed and evenly tanned. Its size and clean design, give a significant increase in image, and the comfort offered, is preferred to other models. It proves particularly indispensable when the backrest is raised to the maximum in the reading position. In most cases it is made in a color matched to that of the Sunshade and usually different to that of the Floorboard. It represents the best balance between image, comfort and bulk. It is made with PVC fabrics and integrally High Frequency welded to ensure watertightness and total waterproofing.
Measure: cm 51x36 thickness cm 6.
DELPHINO: REMARKABLE
Delphino is the Exaggerated Headrest in size and image and is recommended only for indoor use; it can also be used outdoors but the durability will be considerably less. Its anatomical geometry promotes stretching of the skin of the neck and its even tanning. The appropriate choice when the scenic effect takes absolute importance. It is made from PVC fabrics and integrally welded in High Frequency to ensure watertightness and total impermeability. The Fabric used is a Heavyweight type and does not always coordinate with the color of the Sunshade.
Measure: cm 51x42 thickness cm 8.
FIXED INSTALLATION
Fixed installation is done by means of the tacks that secure the Flat Fabric on the Backrest Crossbeam. In this case, no adjustment will be possible and in case of disassembly, the tacks will have to be removed. This installation is recommended only in set-ups where the sunbeds remain in the working position at all times and are never stored during the season of use. It is the preferred solution in all cases where budgets are limited, or a quick and easy installation is desired.
MOBILE INSTALLATION
Mobile installation consists of joining the headrest to the crib using the special RAP Roller (Headrest Attachment Roller) by attaching it to the special Arrangements housed on the top of the BE BED backrest. The BE BED crib is always supplied with such Prearrangements to facilitate the possible installation at a later date, of the Mobile Headrest. This is the highest performance solution; the headrest can be renewed without necessarily renewing its structure as well (RAP Roller).
MOBILE IS BETTER
The Mobile installation allows for the adjustment of the headrest and its rapid attachment/release. In fact, the Roller allows, by rotating it, height adjustment to better suit users of different stature, and thanks to the RAP feature, rapid attachment/removal to the sunbed by means of the special key. This will facilitate the insertion of the headrest "on demand" or its removal even if only for storage. It also represents a 5 cm extension of the length of the backrest without altering the original dimensions of the sunbed.
CLASSIC CAMBIANGOLO
It is the super-tested version, the most reliable version and most familiar to users, who are therefore familiar with its simple operation and use it with ease.
HOW DOES IT WORK?
Lowering the backrest requires operating the lanyard by pulling it, lowering it as desired and releasing the lanyard, while raising it is done by simply pulling the backrest upward until the preferred position is reached.
BENEFITS
No need to explain how the backrest movement works to the user, who has been familiar with it for so many years.
TWO SYSTEMS IN ONE
An important feature of the WireLess Angle Changer System, is the possibility of Downgrade to the Classic Angle Changer System at any time and in a few seconds, by removing the Bascula and Tongue components and applying the Lanyard, as well as Upgrade back to the WireLess Angle Changer, by reinserting them and removing the Lanyard. Thanks to this feature, we achieve the highest level of Customer satisfaction as it retains full freedom of choice on how to operate the movement of the Backrest, which remains one of the most delicate parts in the use of the beach lounger.
COMMON FEATURES
Both versions of the CambiAngolo System, include the features that determine its great reliability, and which are:
- the tip of the barbell, with the crib closed, remains aligned with the aluminum profiles to prevent accidental breakage in the event of a fall;
- There are no "side end stops" typical of the Classic crib, which are also prone to breakage;
- there are no counterweight metals inside it, which over time oxidize and burst the balance wheel;
- rocker arms are installed with repositionable bolts for easy replacement in case of damage;
- all components on the Classic System are ambidextrous to facilitate the unlikely replacement of a component. On the WireLess System, some components are not ambidextrous.
ROUND LINES AND SUPERIOR TOUCH FEELING
All thermoplastic components and the geometries of the aluminum profiles, were designed with the aim of offering in case of contact with the User's body, the most neutral impact possible. The result exceeded expectations: in fact, overall, we obtained such a good touch feeling that it generated satisfaction when touching the lounger itself. Such as, for example, the transition area from the fabric to the floor where special "seals" push the fabric in adherence to the aluminum profile generating a continuity of lines devoid of any "knottiness and roughness" ; or the end caps in the foot area that are rounded and perfectly matched to the geometries of the aluminum, so as to avert any possibility of scratching or injuring the lower limbs that often touch them; or again, the sunshade arms that are rounded and completely unbolted on the outer sides thus averting any possibility of "unhappy touching." Not to mention the supersaturated anodic treatment that with its "fine grain" is a pleasure to feel on the skin.
ADVANCED TECHNOLOGIES
It is the super-tested version, the most reliable version and most familiar to users, who are therefore familiar with its simple operation and use it with ease.
HOW DOES IT WORK?
Lowering the backrest requires operating the lanyard by pulling it, lowering it as desired and releasing the lanyard, while raising it is done by simply pulling the backrest upward until the preferred position is reached.
BENEFITS
No need to explain how the backrest movement works to the user, who has been familiar with it for so many years.
STANDARD LEG
The Basic set-up of BE BED includes the Standard Leg, that is, a pair of Reclining Legs, which, when opened, determine a seat surface height of about 40 cm. This is the most common configuration as it conforms to the height of the Classic Italian style loungers and is the most appropriate when the lounger is used on flooring such as pool edges, solariums or platforms.
HIGH LEG
Optionally BE BED can be set up with the High Leg. Originally created as an aid to the use of the Italian Style beach bed by disabled users, the High Leg is currently also highly appreciated by ordinary Users. In fact, the seat height increases from about 40 cm, to about 53 cm, and in this configuration sitting and rising from BE BED is easier even for people without disabilities. It is also often chosen for maximum scenic effect. In fact, the High Leg gives BE BED greater prominence, which combined with the King Size width, promotes the feeling of "sitting on a throne." The High Leg is particularly appreciated in uses on sand to limit the "sinking" effect.
